Thermostat

Thermo-stat : Oven use

Parts: ignite, Pilot, Thermocouple

Ignition with thermocouple and pilot burner

Seven Universe CSA:
http://directories.csa-international.org/cert_rec_srch.asp?txtDir=*&Submit=Search&txtCustomer=seven+universe&txtProvState=&txtCountry=Taiwan&txtFile=&txtMajorClass=&txtMinorClass=&txtClassDesc=&txtKeyword=

Burner set(2009/7/27)

Aluminum Room with Brass Cap(Two ring one stage seal burner)

The cap can change to Enamel or Aluminum

Aluminum Room with Cap(One ring one stage seal burner)

The cap can use Enamel or Aluminum

Aluminum Room with Enamel Cap(Two ring one stage seal burner)

Aluminum Room with Brass Cap(One ring one stage seal burner)

The cap can use Enamel or Aluminum

Aluminum Room with Brass Cap(Two stage open burner)

The cap can use Enamel or Aluminum

Aluminum Room with Aluminum Cap(One stage open burner)

Aluminum Room with Enamel Cap(One stage open burner)

We can make client’s design or design it for Client.

Gas Valve (Single stage Manual Valve)

CSA:

http://directories.csa-international.org/cert_rec_srch.asp?txtDir=*&Submit=Search&txtCustomer=seven+universe&txtProvState=&txtCountry=Taiwan&txtFile=&txtMajorClass=&txtMinorClass=&txtClassDesc=&txtKeyword=

CB00B
Aluminum valve: CB type 0 degree
Life test: 40,000cycle between 120℃ and 20℃ Ambient temperature:
Leaking <15CC/hr, Working toque<0.4N-M

CB90B

Aluminum valve: CB type 90 degree

Life test: 40,000cycle between 120℃ and 20℃ Ambient temperature: Leaking <15cc/hr,>

CA103B

Aluminum Safety valve: CA type 103 degree

Life test: 40,000cycle between 120℃ and 20℃ Ambient temperature: Leaking <15cc/hr,>

CSA,CE approval

Regulator (Low Inlet pressure types 1/2psi Max.)

GR250 GR120 GR60 Outlet pressure: N: for Natural Gas(3”W.C.~5”W.C.) P: for LPG(8”W.C.~10”W.C.) C: 10”W.C. for LPG; 4”W.C. for N.G. Connect size GR60: Inlet(3/8NPT),Outlet(3/8NPT) GR120:Inlet(3/8,1/2NPT),outlet(3/8,1/2NPT) GR250:Inlet(1/2,3/4NPT),Outlet(1/2,3/4NPT) Application:For main/pilot burner load-delta-P Temperature range-Ambient:32°F~225°F(Special type 0°F~300°F) Inlet pressure rate: 1/2psi CapacitiesIndividual load-Maximum: GR60: 60,000Btu/hr GR120:120,000Btu/hr GR250:250,000Btu/hr *Base on a gas having a heating value of 1,000Btu per cubic foot and a specific gravity of 0.64 at pressure drop of 1.0”W.C. CSA approval

Function upgrade for(GR(60,120,250) type: improved the flow rate function.

New 2018, GR(60,120,250)(N,P,C)-2P: 2psi inlet pressure with Vent Limiter.

New 2022, GR30(N,P,C)

Regulator(High Inlet pressure types)

GCC(QCC)+GR100+Hose

GR100:
Flow rate:100,000Btu/Hr Max. at 11"W.C. outlet pressure, LPG.
Inlet pressure: from 25psig to 250psig
Safety:Lock out when over flow and over temperature.(connect to GCC or QCC)
Inlet connection:POL,GCC(QCC) or other thread type of fitting or connection
Outlet connection:Hose or fitting

GR100 GR55
QCC+Regulator+Hose

GR55:
Flow rate:55,000Btu/Hr Max. at 11"W.C. outlet pressure, LPG.
Inlet pressure: from 25psig to 250psig
Safety:Lock out when over flow and over temperature.(connect to GCC or QCC)
Inlet connection:POL,GCC(QCC) or other thread type of fitting or connection
Outlet connection:Hose or fitting

QCC+GR150+Hose

GR150:
*Flow rate:150,000Btu/Hr Max. at 11"W.C. outlet pressure, LPG.
*Inlet pressure: from 25psig to 250psig
*Safety:Lock out when over flow and over temperature.(connect to GCC or QCC)
*Inlet connection:POL,GCC(QCC) or other thread type of fitting or connection
*Outlet connection:Hose or fitting

G2R150: Two stage Regulator
*Flow rate:150,000Btu/Hr Max. at 11"W.C. outlet pressure(Second stage), LPG.
*Inlet pressure: from 25psig to 250psig
*Safety:Lock out when over flow and over temperature.(connect to GCC or QCC)
*Inlet connection:POL,GCC(QCC) or other thread type of fitting or connection
*Outlet connection:Hose or fitting

GR25AGR25B

GR25(A,B)
*Flow rate:25,000Btu/Hr Max. at 11"W.C. outlet pressure, LPG.
*Inlet pressure: from 25psig to 250psig
*Inlet connection:1Lb Cylinder
*Recommend Flow rate:12,000Btu/hr Max. with 1Lb Cylinder
*Outlet pressure:11"W.C.

GR25D
*Flow rate:25,000Btu/Hr Max. at 11"W.C. outlet pressure, LPG
*Inlet pressure: from 25psig to 250psig
*Inlet connection:1Lb Cylinder
*Recommend Flow rate:12,000Btu/hr Max. with 1Lb Cylinder
*Outlet pressure:From Off and Low(5"W.C.) to High(18.5"W.C.)

GR80(High pressure outlet)
*Flow rate:80,000Btu/Hr Max. at 5psi(10psi or 15psi)outlet pressure, LPG
*Inlet pressure: from 25psig to 250psig
*Safety:Lock out when over flow and over temperature.(connect to GCC or QCC)
*Inlet connection:POL,GCC(QCC) or other thread type or fitting or connection
*Outlet connection:High pressure Hose or fitting
*Outlet pressure:From Off and Low to high(5psi,10psi or 15psi request from customer)

*All type can connect with our Valve to the outlet.

CSA approval

Gas control valve(BZ Type)

Type #:BZA01A0201
Inlet-Outlet:3/8NPT-3/8NPT

Outlet pressure:10.5"W.C. for LPG

12VDC at 0.48A

64700Btu/hr,1.0"W.C.pressure drop with LPG.

Max.pressure: 1/2psig

CSA approval

All types we have CSA approval:

BZ(A,B,C,D,E,F,G)02(A,B,C,D,E)(01,02,03,04,05,06,07,08,10,11)

Temperature range-Ambient:

Max. 200°F(93.3°C)

min. -40°F(-40°C)

Flow Rate:

LPG:64700Btu/hr,1"W.C.pressure drop

N.G.:40000Btu/hr,1"W.C.pressure drop

Outlet Orientation:
A = Straight Thru Outlet
B = 90 Degree Left Outlet
C = 90 Degree Right Outlet
D = Dual Outlet (L+R)
E = Dual Outlet (L+Str)
F = Dual Outlet (R+Str)
G = Left Inlet 90 Degree Outlet

Inlet/Outlet Specification:
01 = 3/8NPT, 3/8NPT
02 = 1/4NPT, 1/4NPT
03 = 1/4NPT, 3/8NPT
04 = 3/8NPT, 1/4NPT
05 = 13/16-18NS (inlet), orifice (outlet)

Automatic Valve Voltage:
A = 12 volt DC
B = 24 volt AC (50/60 Hz)
C = 12 volt DC with wire
D = 24 volt AC (50/60 Hz) with wire
E = 120 volt AC (50/60 Hz)

Outlet Pressure Regulator Setting:
01 = 10 Inch Water Column
02 = 10.5 Inch Water Column
03 = 3.5, 10.5 Inch Water Column, convertible
04 = 10/5.5 Inch Water Column, Hi-Lo solenoid employed
05 = 10/4.9 Inch Water Column, Hi-Lo solenoid employed
06 = 3.0 Inch Water Column
07 = 3.5 Inch Water Column
08 = 4.0 Inch Water Column
10 = 11 Inch Water Column
11 = Non-regulated

Outlet Pressure:
No. (BZ)XXXX01 - 10 inch water column
No. (BZ)XXXX02 - 10.5 inch water column
No. (BZ)XXXX03 - 3.5/10.5 inch water column - convertible
No. (BZ)XXXX04 - 10/5.5 inch water column – Hi/Lo solenoid
No. (BZ)XXXX05 - 10/4.9 inch water column – Hi/Lo solenoid
No. (BZ)XXXX06 - 3.0 inch water column
No. (BZ)XXXX07 - 3.5 inch water column
No. (BZ)XXXX08 - 4.0 inch water column
No. (BZ)XXXX10 - 11 inch water column
No. (BZ)XXXX11 - Non-regulated

Type#.BZA01B0301

Inlet-Outlet:3/8NPT-3/8NPT

Outlet pressure:LPG 10.5"W.C./NG 3.5"W.C.

24VAC at 0.35A

64,700Btu/hr,1"W.C.pressure drop for LPG.

40,000Btu/hr,1"W.C.pressure drop for N.G.

Max.pressure:1/2psig

CSA approval

Type#.BZA01C0101

Inlet-Outlet:3/8NPT-3/8NPT

Outlet pressure:10"W.C.

12VDC at 0.48A

64,700Btu/hr,1"W.C.pressure drop for LPG

Max. pressure:1/2psig

CSA approval

Type#.BZB01A0201

Inlet-Outlet:3/8NPT L 3/8NPT

Outlet pressure:10.5"W.C.

12VDC at 0.48A

64,700Btu/hr,1"W.C.pressure drop for LPG.

Max.pressure 1/2 psig

CSA approval

Type#.BZB01A0401

Inlet-Outlet:3/8NPT L 3/8NPT

Outlet pressure:High 10"W.C. & Low 5.5"W.C.

12VDC at 0.48A(0.73A)

64,700Btu/Hr,1"W.C.pressure drop for LPG.

Max. pressure:1/2psig

CSA approval

Type#.BZB01A0501

Inlet-Outlet:3/8NPT L 3/8NPT

Outlet pressure:High 10"W.C. & Low 4.9"W.C.

12VDC at 0.48A(0.73A)

64,700Btu/hr,1"W.C.pressure drop for LPG.

Max.Pressure:1/2psig

CSA approval

Type#.BZB01B0301

Inlet-Outlet:3/8NPT L 3/8NPT

Outlet Pressure:10.5"W.C. LPG; 3.5"W.C.N.G.

24VDC at 0.35A

64,700Btu/hr,1"W.C.pressure drop for LPG.

40,000Btu/hr,1"W.C.pressure drop for N.G.

Max pressure:1/2psig

CSA approval